📍 MIDC Bhosari · PIN 411026

Machine Monitoring System (IIoT & OEE) in Bhosari

Name: Infonoxe Technologies
Rating: 5.0

See every machine’s status, output and downtime reason live — on new CNC and PLC machines and on older machines without any controller.

Book a site survey Get a written quote

Machine Monitoring for Bhosari plants

The machines in MIDC Bhosari are often old, reliable and undocumented: presses, lathes, milling and welding stations that run well but report nothing. A retrofit monitor does not change the machine. It adds a current or cycle sensor, a small gateway and a dashboard, then tells you the running hours, the count and the stoppages. For tool rooms and job shops it also shows which jobs are really profitable by machine time.

Cost depends on how many machines you connect and how (controller data or retrofit sensors). We quote per machine group after a short survey, in writing.

Good to know: OEE is only as honest as the data behind it. We verify counts against your manual figures during the pilot and agree how stops are classified before reports go to management.

About MIDC Bhosari

MIDC Bhosari is one of the oldest and densest industrial estates in the Pune region, with engineering units, press shops and tool rooms packed along Telco Road and the Pune–Nashik Highway. Many plants run older machines that still produce well but give no data. That makes retrofit monitoring, gate cameras for the constant truck movement and focused PLC upgrades a good fit.

Area details

Belt: MIDC Bhosari

District: Pune

PIN code: 411026

Main roads: Pune–Nashik Highway (NH60) · Telco Road · Alandi Road

Landmarks: MIDC Bhosari · Landewadi · Alandi Road · Moshi (adjacent)

Industries here

Engineering and machine shopsAuto components and press shopsFabrication and tool roomsPackaging and allied units

What you get

✅Live status board: running, idle, down and offline, for every connected machine

✅OEE with availability, performance and quality, by machine, line and shift

✅Downtime capture with reason codes selected by the operator on a tablet or panel

✅Part counts, cycle time and rejection tracking against plan

✅Retrofit kits for older machines without a controller

✅Shift and daily reports, plus WhatsApp or SMS alerts for long stops

Want to see it in action first? Try the interactive machine monitoring demo.

Machine Monitoring in Bhosari — FAQs

Will a retrofit sensor interfere with an old machine in Bhosari?

No. Current and cycle sensors are non-invasive and do not change how the machine operates.

Can you monitor old machines that have no PLC?

Yes. We use retrofit sensors to detect running state and count cycles or parts. It gives status, count and downtime, though not the internal parameters a modern controller provides.

Which machines and controllers work?

CNC machines, PLC-controlled lines, injection moulding and press machines and many others. Support depends on the controller protocol (for example Modbus or OPC-UA); we check each machine type during the survey.

What is OEE and how is it calculated?

OEE = availability × performance × quality. It tells you what share of planned production time produced good parts at the ideal speed.

More in Bhosari

All industrial services in Bhosari Camera Visualization in Bhosari Plant Automation in Bhosari

Machine Monitoring in other industrial areas

Machine Monitoring in Chakan Machine Monitoring in Talawade Machine Monitoring in Ranjangaon Machine Monitoring in Ahilyanagar Machine Monitoring in Supa MIDC Machine Monitoring in Waluj